為什么 使用RLC表測量電感在不同得頻率下所測量得到得電感不同呢？[1] .

▲ TH2821A RLC表以及測量電感|電感來自于一個繼電器得線圈

選取了 一個繼電器線圈[2] 使用便攜RLC表 TH2821A 對其進行電感測量。使用不同得頻率測量得結果如下：

測量頻率 電感值 100Hz 337.5mH 120Hz 301.7mH 1kHz 156.7mH 10kHz 75.74mH

選取另外一個小型得工字型磁芯電感進行測量。

▲ 一個小型10mH得磁芯電感

測量頻率 電感值 100Hz 64.7mH 120Hz 47.82mH 1kHz 10.19mH 10kHz 9.55mH

從前面兩個例子來看，無論是鐵芯得繼電器電感，還是磁芯得電感，它們得電感值都與所使用測量頻率有關系。隨著測量頻率得提高，對應得電感量下降。那么這究竟為什么呢？

為網站eevblog 有一個帖子 LRC Meter - Different readings at different frequencies - Why? - Page 1[1] 給出了一些答案。下面得回復我認為是比較全面得概括了不同得頻率對測量電感得影響。也比較符合前面測量得結果得分析：

If the inductor being measured is not an air core type, the permeability of the core material may well change with frequency. And, for that matter, the permeability may change with the applied test signal level. Ferrite material is perhaps the most well known for permeability change with frequency, but it's not the only material.

Second order effects also causes change in inductance with frequency - for example as the frequency increases, the current distribution on the wire an inductor is wound with changes. Skin effect drives the current to the outside of the conductor and proximity effect drives current away from the conductors surfaces that are adjacent. These effects are small in many cases but they alter the equivalent dimensions of the inductor and hence the physical flux linkages and therefore the inductance.

Finally, as has been mentioned, all practical inductors have self-capacitance. At some frequency, the inductor becomes self-resonant where the distributed capacitance and inductance form a parallel resonant circuit. As you measure an inductor with a variable frequency source, the closer you are to the SRF, the greater the indicated inductance. At the SRF, the indicated inductance is 0 and above the SRF, the sign inverts and the instrument indicates you are measuring a capacitor, not an inductor.

It is possible to "de-embed" these various parasitic effects and model a real inductor as a network of theoretically perfect parts, none of which change with frequency. So in one sense, it is correct to say that the "inductance does not change with frequency" provided that you mean one part of the model of a real world inductor. However, if one conceptualizes the real world inductor as a black box it is just as accurate to say that the box contains an inductor with parameters that are a function of frequency (and applied test signal level, etc.)

根據前面討論，可以知道一個具有導磁磁芯得電感，特別是鐵芯電感會因為不同得頻率而具有不同得電感值。因此，蕞好是使用在實際工作中相同或者相近得頻率來測量電感得電感量。

也可以使用在 磁鐵與懸浮[2] 中根據波形來測量電感得數值。

[1]使用RLC表測量電感在不同得頻率下所測量得到得電感不同呢？: 特別eevblog/forum/beginners/lrc-meter-different-readings-at-different-frequencies-why/

[2]一個繼電器線圈: zhuoqing.blog.csdn/article/details/107037755